KCR |
FDV-H |
FCH |
Capable of handling liquids with solids, the Nagle FCH Horizontal Pump can tolerate a wide range of abrasive and corrosive applications. Also available in FDV-H configuration for dry pit operation. These pumps incorporate many design features developed over more than 50 years of field experience.
Features
- Large impeller passages to reduce wear, allow maximum solids handling.
- Heavy wall sections for maximum service life.
- Bearing isolators (Inpro) used to extend bearing life.
- Bearing cartridge design for easy replacement of rotating assembly.
- All components piloted to insure concentricity during maintenance, impeller adjustment and assembly.
- Larger shaft diameter decreases shaft movement allowing extended service life on packing or seals.
- Front and back vanes for axial load control and stuffing box pressure reduction.
- Stainless steel gland is standard.
- Finite element designed shaft for minimum deflection and stress at packing.
- Computer designed impeller: high efficiency, 5 or 6 blade designs.
- Sizes 1" through 12", capacities to 8,000 USGPM.
- Dry packing in box (no seal water).
- Mechanical seals.
- Dynamic seal available.
- Suction inducers on selected sizes.
- Priming inducter for positive priming with heavy solids.
KCR Model
Capable of handling liquids with up to 70% solids, the Nagle KCR Horizontal Pump can tolerate a wide range of abrasive and corrosive applications. This pump incorporates many design features developed over more than 50 years of field experience.
Features
- Large clearance impeller designs with 3 or 4 blades optimized for maximum wear resistance.
- Long entry radius into impeller minimizes turbulence to extend impeller life.
- Wider sealing areas eliminate need for wear rings.
- Progressive casing wall thickness for maximum service life.
- Adjustable impeller maintains design conditions.
- All components piloted to insure concentricity during maintenance, impeller adjustment and assembly.
- Minimal shaft deflection through box due to increased shaft and bearing sizes.
- Cartridge design allows for easy replacement of rotating assembly.
- Large multi-labyrinth flinger on both ends of cartridge to minimize bearing contamination.
- Sizes 1" through 16", capacities to 12,000 USGPM.
- Dry packing in box (no seal water).
- Mechanical seals.
- Dynamic seal available.
- Suction inducers on selected sizes.
- Priming inductor for positive priming with heavy solids.